오늘 반자이하비에서 요코모 기자재가 날아왔습니다.
그럼 상세 사진 나갑니다.
자세한 설명과 스펙은 하기와 같습니다.
SP-BLLHD ZERO Brushless Steering Servo for Drift Low Profile
A high-end brushless servo for drift is newly introduced Laser engraving aluminum case with high heat dissipation into a dedicated design to enhance the atmosphere of drift. Of course, it is a high spec that fully supports high-load drift running as performance, brushless driving motor which is the essential part of steering servo, improved both function and durability at the same time. Then, the internal gear that transmits the drive, and the final gear are all made of the full Titan, and even though it is super lightweight, the wear of the gear is also prevented, and the basic performance of the motor is told without exceeding it. The case that holds the gear inside is unexpectedly made with ultra-high precision full ali, the gear meshing precision is outstanding. Heat sink effect which is characteristic of aluminum enhances heat dissipation.
?Noteworthy compatibility with Yokomo made steering gyroscope which automatically supports countersteering when installing in RWD drift car which users are increasing drastically recently. Hunting (erroneous operation) phenomenon which becomes one of big troubles at the time of installing a gyro is hard to occur, many reports that hunting does not come out just by exchanging with ZERO brushless series from other servos are received. Of course, you can take advantage of excellent steering holding power in AWD, driving with a high sense of stability is possible.
?Price is set reasonably more than before, It is a gem that you can recommend to every drift driver from novice to experts.
Specs
Use voltage 6.0 ? 7.4V ...
Speed 0.07 Sec ... / 60 (6.0V) 0.06 Sec / 60 (7.4V)
Torque 12.6 Kg - Cm (6.0V) 15.0 Kg · Cm (7.2V)
Size - 41 x 20 x 25.3 mm
Weight - 52.0 g
Case - Aluminum
Gear - Titanium
이건 드리프트 스펙의 10.5T 모터입니다.
Drfit Spec now available from popular Yokomo Racing Performer Brushless Motor Series!
Spec has been modified for Drift use and can be ca;able of high RPM yet smooth action.
Whether you are running on asphalt, Carpet, P Tile or concrete, this motor will perform for you.
Feature:
* Newly designed case for better cooling effect
* Newly designed drift type rotor and magnet
>> Better rotation, Smoother and better control
* Newly develped stater for better out put feature
* Rotor size: D12.0 x D7.25
* Can be used with torque type balace rotor (available as optional parts)
마지막은 드리프트 스펙의 변속기!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BL-PRO4D BL-PRO4 Drift Spec Brushless ESC
Based on BL - PRO 4. Team Yokomo s Takahiro player tune.
Standard data is set so as to be able to best match both 2WD and 4WD.
In order to make it easy to control the drift angle during cornering. set the throttle characteristics in the low speed range to mild. and boost the boost from the medium speed range to produce powerful turning and turning back.
While maintaining ease of handling. it makes it possible for anyone to have a powerful drift.
In addition. the case of PRO4D is full ali with high cooling efficiency. and both sides adopt dedicated design with laser engraving of drift spec.
Cooling is also thorough equipped with a cooling fan.
.
.
.
.
.
.
.
.
.
.
.
.
마지막으로 YD-2 SX에 사용되는 기어박스와 모터 마운트입니다.
모터 마운트에는 냉각팬 마운트가 부속되어 있습니다. 므핫핫핫.
주말에 정비한 사진에 보시면 상단 데크가 YD-2용으로 되어 있는 것을 보실 수 있습니다.
기존 YD-2의 기어박스와 상단 데크는 SX에 맞도록 되어 있어 상호 호환이 가능합니다.
하지만 저는 완전한 SX을 만들기 위해 파트를 주문했습니다.
그렇지만 기존 조합에도 주행은 매끄럽더군요. 대신 배터리를 고정하는 장치가 없어 좀 덜렁거리긴합니다.
마지막 사진으로는 오빠돈줘(OVERDOSE)의 WORK EMOTION XT7입니다.
옵셋은 앞 5mm, 뒤 7mm를 사용할 계획입니다.
드클의 안명철님의 게시물에 항상 모델로 나오는 바로 그 휠입니다.
MATT BLACK이나 WHITE를 갖고 싶었지만
소량 입고로 물량이 동나버려 저는 아래와 같이 번쩍번쩍 CHROME으로 구매했습니다. (아쉬워라....ㅠㅠ)
그럼 다음에는 장착기로 찾아뵐게요.